| Modification | Description | Activations |
|---|
|
2830
|
NEW DISCHARGE TUBE WITH TUBE FLANGE CHANGED |
DAT 15/05/1998
|
|
2842
|
NEW OIL PROTECTION ON THE GEAR CONTROL SHAFT |
DAT 15/08/1997
|
|
2876
|
NEW YELLOW SIDE DIRECTION LIGHTS REPLACING THE PRESENT ORANGE ONES |
DAT 15/07/1997
|
|
2932
|
FRONT FUNCTIONAL MODEL (EL) WIPER ARMS ON LUXURI MODEL (HL) ADOPTED |
DAT 15/12/1997
|
|
2945
|
NEW "RETURNLESS" INJECTION SYSTEM |
DAT 15/10/1999
|
|
2946
|
NEW TIMING SYSTEM COVER WITH CO-INJECTED GASKET |
MOT 0052789
|
|
2993
|
GASKET REMOVED FROM FRONT BUMPER |
DAT 15/10/1997
|
|
3035
|
NEW INJECTOR WIRING SUPPORTING BRACKET |
MOT 9878289
|
|
3039
|
NEW BED, NEW PIPE AND OIL DIPSTICK |
MOT 9944984
|
|
3064
|
NEW EXHAUST CAMSHAFT, BASE R.17.5, AND NEW EXHAUST VALVE 46461209 |
MOT 9911365
|
|
3092
|
NEW RIGHT AXLE SHAFT WITH DAMPING MASS MOVED TO WHEEL SIDE ADOPTED |
DAT 15/10/1997
|
|
3153
|
NEW 9 INCH POWER BRAKE WITH NEW PIPES ADOPTED TO REPLACE 8 INCH POWER BRAKE |
DAT 15/03/1998
|
|
3168
|
NEW BATTERY DRIP TRAY |
DAT 15/01/1998
|
|
3174
|
NEW TRUNK RACK KIT ON PALIO SW |
DAT 15/09/1998
|
|
3186
|
NEW LOCK STRIKER PLATE ADOPTED AND SHOCKPROOF PADS REMOVED |
DAT 15/12/1998
|
|
3199
|
NEW JACK SHAFT COVER |
DAT 15/01/1998
|
|
3212
|
NEW VITON FUEL PIPING WITH INPUT AND OUTPUT PIPES AND DUCT THEREOF |
MOT 9951720
|
|
3221
|
NEW FRONT SHOCK ABSORBER SMALL BLOCKS AND FIXINGS THEREOF |
DAT 15/04/1998
|
|
3223
|
FRONT SHOCK ABSORBERS WITH NEW UPPER HOLE POSITIONING FOR SECURING TO COLUMN |
DAT 15/03/1998
|
|
3227
|
NEW AIR-CONDITIONER AND HOSES ADOPTED |
TEL 0596832
|
|
3234
|
NEW HEATER WATER HOSES WITH BY PASS VALVE (PRESSURE STABILIZING VALVE) |
DAT 15/02/1998
|
|
3287
|
NEW SIDE-MEMBER PANELS (MINISKIRTS) |
DAT 15/03/1998
|
|
3307
|
NEW IGNITION COILS |
MOT 8297330
|
|
3325
|
NEW LIGHTS WITH IMPROVED LIGHTING |
DAT 15/05/1998
|
|
3334
|
NEW SHAFTS WITH TREE-LIPS BEARING |
DAT 15/12/1998
|
|
3343
|
NEW WATER TEMPERATURE SENSOR AND NEW THERMOSTAT |
MOT 0060933
|
|
3348
|
ON AIR-CONDITIONED VEHICLES SOLAR CONTROL NOT HEATED WINDOWS REPLACED WITH STAND. NOT HEATED WINDOWS AS BASIC VEHICLES |
DAT 15/06/1998
|
|
3359
|
NEW LOCAL SUPPLY LOUD-SPEAKERS FOR TURKEY MARKET |
DAT 15/06/1998
|
|
3395
|
NEW LAMBDA PROBE WITH 700MM WIRE INSTEAD OF 800MM WIRE |
DAT 15/09/1998
|
|
3396
|
NEW 5 SPEED/R.G. ROD AND R.G. LEVER |
DAT 15/07/1998
|
|
3402
|
NEW SHOE BRAKES WITH IMPROVED HAND BRAKE INDENTATION |
DAT 15/06/1999
|
|
3404
|
NEW LONGITUDINAL RODS TO CHANGE PLUG FIXING HOLE SHAPE FROM CONICAL TO CYLINDRICAL |
DAT 15/11/1998
|
|
3425
|
NEW SERVOBRAKE WITH IMPROVED PUMP AND RELEVANT BRAKE CALLIPERS ADOPTED |
DAT 15/03/1998
TEL 0582135
|
|
3427
|
NEW SHEATH AND NEW ENGINE BONNET OPENING LEVER TO AVOID BREAKAGE UNDER LOW TEMPERATURES ADOPTED - POLAND MARKET |
DAT 15/10/1998
|
|
3435
|
NEW HAND BRAKE LEVER HANDLE FOR TURKEY MARKET |
DAT 15/07/1998
|
|
3443
|
NEW PLATE ON GEARBOX SIDE WITH RELEVANT FIXINGS TO REMOVE NOISE AND KNOCKS |
DAT 15/11/1998
|
|
3448
|
NEW HYDRAULIC POWER STEERING BOX TO AVOID INTERFERENCE WITH FRONT SUSPENSION CROSSMEMBER ADOPTED |
DAT 15/08/1998
|
|
3488
|
NEW AIR CLEANER INCLUDING AIR INLET |
TEL 0521075
|
|
3492
|
NEW GEARBOX WITH 17/65 FINAL DRIVE ADOPTED |
VET 6215897
|
|
3514
|
NEW ENGINE BLOCKS AND NEW DRIVING SHAFTS MACHINED IN 3 CLASSES |
DAT 15/03/1999
|
|
3551
|
NEW ARMS, PILLARS AND BRAKE DISC GUARDS |
DAT 15/11/1999
|
|
3559
|
NEW C514 GEARBOX |
DAT 15/05/1999
|
|
3564
|
NEW RG GEARS WITH REDUCED ANGLE TOOTHING CHAMFERING AND NEW 1ST AND 2ND SPEED SLEEVE |
DAT 15/12/1998
|
|
3572
|
NEW 3 AND 4 SPEED DRIVING GEARS AND RELEVANT SLEEVE |
DAT 15/10/1998
|
|
3587
|
NEW AIR DUCT AND NEW LEFT SIDE DASHBOARD PANEL OUTLET ADOPTED |
DAT 15/06/1998
|
|
3598
|
NEW GEARBOX SELECTION CABLE AND NEW LEVER WITH BALL TERMINAL |
DAT 15/08/1998
|
|
3602
|
MODEL YEAR 99 |
DAT 15/01/1998
|
|
3642
|
NEW STOP TIE ROD AND NEW UPPER AND LOWER FIXED HINGE FOR DOOR OPENING ANGLE REDUCTION |
DAT 15/04/1999
|
|
3695
|
REFLECTOR REMOVED ON MAROCCO/POLAND MARKET |
DAT 15/05/1999
|
|
3706
|
NEW SWITCH TAG WITH INVERTED END KEYS |
DAT 15/04/1999
|
|
3710
|
NEW WHEEL CAP REPLACING THE CURRENT ONE FOR SURFACE TREATMENT |
DAT 15/04/1999
|
|
3711
|
NEW WATER PUMP WITH OPTIMISED IMPELLER ADOPTED |
DAT 15/04/1999
|
|
3731
|
DOOR LOCK CONTROL UNIT MOVED FROM UNDER SEAT TO FUSE BOX AND BRACKET REMOVED |
DAT 15/04/1999
|
|
3740
|
NEW SHEATH AND NEW ENGINE BONNET OPENING LEVER TO AVOID BREAKAGE UNDER LOW TEMPERATURES ADOPTED - TURKEY MARKET |
DAT 15/03/1999
|
|
3753
|
HAND BRAKE HOSE PATH ON LEFT SIDE MODIFIED TO AVOID INTERFERENCE WITH BRAKE PIPE |
DAT 15/05/1999
|
|
3760
|
NEW STARTER ADOPTED FOR STANDARDISATION |
VET 3038861
|
|
3787
|
NEW HYDRAULIC CLUTCH CONTROL PIPE TO PREVENT INTERFERENCE WITH ENGINE |
DAT 15/05/1999
|
|
3844
|
ON LUXURY VERSIONS FOR POLAND MARKET ADOPTED RUSSIA MARKET CONSOLE |
DAT 15/06/1999
|
|
3845
|
NEW FREON TUBES AFTER TWO-REFLECTOR HEADLIGHTS PRESETTING FOR DIESEL SETUPS |
TEL 0801780
|
|
3848
|
HAND BRAKE LEVER BOOT ADDED ON EL VERSIONS FOR TURKEY MARKET AND MAT PART NUMBER TO BE BORED CHANGED |
DAT 15/04/1999
|
|
3849
|
NEW POWERED EXTERNAL REAR VIEW MIRRORS FOR TURKEY MARKET TO REMOVE VIBRATIONS DURING RUNNING |
DAT 15/05/1999
|
|
3851
|
NEW PRODUCTION BALANCING BLOCK KIT WITH CODE CARD PLATE IN FOUR LANGUAGES (ENGLISH-POLISH-RUSSIAN-TURKISH) |
DAT 15/06/1999
|
|
3855
|
NEW REAR CROSS MEMBER MODIFIED TO AVOID SPARE WHEEL THEFT |
DAT 15/01/2001
|
|
3859
|
ON EL VERSIONS WITH TK/PL POWER WINDOWS, NEW DOOR OPENING TAG PART NUMBERS ISSUED TO AVOID INTERFERENCE WITH PANELS |
DAT 15/06/1999
|
|
3905
|
ADOPTING NEW STARTER MOTOR WITH TWO FASTENERS |
TEL 3058719
TEL 3073903
|
|
3906
|
NEW 1ST SPEED GEAR AND 1ST SPEED SYNCHRO RING WITH 6 GR. 45' CONE ANGLE |
DAT 15/05/1999
|
|
3916
|
NEW PUMP WATER DELIVERY PIPE |
DAT 15/07/1999
|
|
3920
|
SINGLE-SPRING ON CYLINDER HEAD VALVES ADOPTED |
MOT 0214086
MOT 0216156
|
|
3921
|
NEW CROWN WHEELS AND PLANET GEARS WITH REDUCED BACKLASH |
DAT 15/04/1999
|
|
3945
|
NEW GEARBOX FLEXIBLE CABLES WITH SILENT BLOCK AND NEW SOUNDPROOF COVER FOR GEARBOX ASSEMBLY |
DAT 15/06/1999
|
|
3967
|
NEW 5TH SPEED FORK AND SLEEVE TO REMOVE REVERSE BRAKE |
DAT 15/06/1999
|
|
3987
|
NEW GEARBOX WITH 1ST AND 2ND SPEED PRE-SYNCHRONISATION PLUG |
DAT 15/09/1999
|
|
4000
|
TIMING BELT GEARS AND WATER PUMP, 8 PITCH INSTEAD OF 9.25, ADOPTED |
MOT 9042883
|
|
4050
|
NEW COMPLETE AUXILIARY SHAFT COVER WITH 42 EXT. DIAMETER OIL SEAL INSTEAD OF 47 |
DAT 15/07/1999
|
|
4068
|
NEW ELECTRIC MIRROR CONTROL POSITION ON DOOR CASE |
DAT 15/04/1999
|
|
4073
|
NEW REINFORCED C514 GEARBOX |
DAT 15/10/1999
|
|
4144
|
NEW STARTER ADOPTED AFTER MANIFOLD DIAMETER MODIFICATION FROM 34 MM TO 30 MM |
DAT 15/06/2000
|
|
4158
|
NEW GEARBOX WITH 5TH SPEED PRE-SYNCHRONISATION PLUG |
DAT 15/11/1999
|
|
4159
|
WATER PUMP WITH EXTENDED INNER BEARING AND NEW PULLEY ADOPTED |
MOT 2429224
|
|
4166
|
NEW CYLINDER HEAD COVER WITH IMPROVED SEAL |
DAT 15/11/1999
|
|
4168
|
NEW MULTIPLE INSTRUMENT AFTER BRAKE PAD SENSOR REMOVAL |
DAT 15/11/1999
|
|
4189
|
NEW OIL PUMP AND OIL DIPSTICK, NEW PUNTO ENGINE ORIGIN, ADOPTED |
MOT 9359590
|
|
4191
|
NEW BATTERY BOX REPLACING THE CURRENT ONE WITH BLOW-BY PIPE LOCKING BRACKET |
DAT 15/01/2000
|
|
4204
|
NEW OIL RETURN PIPE TO AVOID INTERFERENCE WITH ALTERNATOR |
DAT 15/12/1999
|
|
4230
|
NEW ENGINE SUSPENSION SUPPORT AND RADIATOR SUPPORT TO AVOID INTERFERENCE WITH ENGINE PLUG |
DAT 15/07/2000
|
|
4236
|
NEW TAG AND AUDIO SYSTEM DISPLAY WITH MODIFIED INCLINATION TO IMPROVE VISIBILITY |
DAT 15/05/1998
|
|
4243
|
NEW REAR SIDE MEMBER AND WHEEL BOX PROTECTION WITH 4 INDENTATIONS FOR WHEELHOUSE FIXING |
DAT 15/11/1999
|
|
4259
|
NEW AUDIO SYSTEM DISPLAY WITH NEGATIVE-TO-POSITIVE CONTRAST |
DAT 15/07/1999
|
|
4276
|
NEW ROOF TRIM WITHOUT FRONT GRIP HANDLES ON DRIVER SIDE FOR G.D. VERSIONS |
DAT 15/12/1999
|
|
4288
|
NEW INTAKE DUCT WITH BUILT-IN FUEL RAIL SUPPORTING CLIPS |
DAT 15/02/2000
|
|
4311
|
NEW INA BELT TENSIONER BEARING WITH 70 MM DIAMETER INSTEAD OF 80 MM |
DAT 15/02/2000
|
|
4315
|
NEW UPPER DASHBOARD WITH NEW INTERNAL RH-LH SIDES TO REMOVE SLOT IN HINGE AREA |
DAT 15/07/2000
|
|
4327
|
CORNER MOULDINGS FROM FRONT FENDERS REMOVED AND NEW DOOR MOULDINGS ISSUED |
DAT 15/03/2000
|
|
4344
|
NEW BRAKE PEDAL AND SERVO BRAKE WITH FORK CAP AND COUPLING PIN |
DAT 15/07/2000
|
|
4350
|
NEW GEARBOX WITH PRE-SYNCHRONISATION PLUG FOR 1st, 2nd , 3rd, 4th GEAR |
DAT 15/03/2000
|
|
4378
|
NEW FRONT SHOCK ABSORBERS WITH FIXED COVER |
DAT 15/06/2000
|
|
4393
|
NEW PIPE FOR HYDRAULIC CLUTCH TO OPTIMISE GEARBOX AREA PATH |
DAT 15/03/2000
|
|
4441
|
NEW SHORT-STROKE OUTPUT SHAFT FOR LONG-STROKE ROCKERS STANDARDISATION |
MOT 0281766
|
|
4476
|
NEW AIR CONDITIONER AND RELEVANT CONTROL MASK FOR INDIA MARKET ADOPTED |
DAT 15/05/2000
|
|
4481
|
NEW GEAR SELECTION SPRING WITH IMPROVED LOAD |
DAT 15/05/2000
|
|
4506
|
DOUBLE CONE ON 1ST AND 2ND SPEED AND INA PRESYNCHRONIZATION ON 3RD/4TH/5TH/6TH SPEED ADOPTED |
DAT 15/09/2000
|
|
4534
|
NEW CLASS 1 TINTED GLASSES |
DAT 15/06/2000
|
|
4554
|
NEW STEERING COLUMN STALK AND STEERING WHEEL FOR AIR-BAG VERSIONS AFTER VARYING WIPING CONTACT MATERIAL |
DAT 15/01/2000
|
|
4569
|
NEW SPARE WHEEL HOUSING AND CENTRAL CROSS MEMBER AND ANTI-BULGING FOR STANDARDISATION WITH PALIO S.W. SOUTH AMERICA |
DAT 15/07/2000
|
|
4576
|
NEW EXTERNAL BODY SIDES-REAR FRAMES-LOKARI-MINISKIRTS FOR STANDARDISATION WITH S.W. RESTYLING |
DAT 15/07/2000
|
|
4600
|
NEW CYLINDER HEADS FOR 1600 TRQ WITH M10 TIMING SYSTEM COVER FASTENING HOLES |
MOT 0346147
|
|
4644
|
NEW DOUBLE CONE SYNCHRONISERS ON 1ST AND 2ND SPEEDS |
DAT 15/09/2000
|
|
4658
|
PRE-SYNCHRONISATION ON 1st-2nd-3rd-4th-5th SPEED ADOPTED |
TEL 6265060
|
|
4713
|
ADOPTION OF NEW BRAKE DISK GUARDS |
DAT 15/09/2000
|
|
4720
|
NEW DIFFERENTIAL CASE WITH INCREASED BALL DIAMETER |
DAT 15/07/2001
|
|
4722
|
100A ALTERNATOR ADOPTION |
MOT 2437406
|
|
4729
|
NEW CLUTCH FLEXIBLE CABLES WITH WIDENED FLANGE, AND LOWER DASHBOARD FOR 178 RST ADVANCE COMPONENT STANDARDISATION |
DAT 15/04/2001
|
|
4755
|
PRE-SYNCHRONIZER ADOPTED ON 1-2-3-4-5 GEARS |
TEL 3070145
|
|
4758
|
ADOPTION OF CLUTCH DISKS WITH NEW MATERIAL |
DAT 15/07/2000
|
|
4762
|
NEW CYLINDER HEAD COVER WITH PHASE SENSOR SEAT HOLE |
DAT 15/10/2000
|
|
4768
|
ADOPTION OF STEERING AND POWER STEERING BOXES EQUIPPED WITH ARTICULATED HEADS |
DAT 15/09/1999
|
|
4782
|
FOR SOUTH AFRICAN MARKET ON BASIC AND FUNCTIONAL VERS. CARPET REPLACED ON LUXURY VERS. CARPET AND SIDE COVERS REPLACED |
DAT 15/10/2000
|
|
4830
|
FOR SOUTH AFRICAN/INDIAN MARKETS NEW FRONT AND REAR IRON GIRDERS TO IMPROVE DASHBOARD-FLOOR COUPLING |
DAT 15/01/2001
|
|
4833
|
NEW OIL PUMP WITH ENHANCED DISTRIBUTION GUARD SECURING BOSS |
MOT 9765747
|
|
4834
|
FOR SOUTH AFRICAN/INDIAN MARKETS NEW BOTTOM AND FILLER DOOR WITH PLUG INSERTION |
DAT 15/01/2001
DAT 15/01/2001
DAT 15/02/2001
DAT 15/02/2001
|
|
4869
|
FOR INDIAN MARKET ADOPTION OF FRONT WHITE SIDE LIGHTS REPLACING THE CURRENT YELLOW ONES |
DAT 15/01/2001
|
|
4870
|
NEW AIR CONDITIONER WITHOUT POLLEN FILTER REPLACING THE CURRENT ONE |
DAT 15/05/1999
|
|
4884
|
NEW SIDE LIGHTS AND REAR LIGHTS FOR INDIAN PALIO S.W. FOLLOWING NEGATIVE HOMOLOGATION RESULT |
DAT 15/06/2000
|
|
4888
|
NEW PAIRED PARTS ADOPTED FOR INDIAN AND SOUTH-AFRICAN MARKETS REPLACING THE CURRENT ONES FOR AN IMPROVEMENT |
DAT 15/10/2000
|
|
4898
|
NEW THROTTLED BODY MADE IN ITALY INSTEAD OF BRASIL |
TEL 6220124
|
|
4906
|
NEW FRONT BUMPERS WITH GRILLE ON SOUTH AFRICA SETUPS ADOPTED |
DAT 15/07/2000
|
|
5037
|
UNION-PLUG ASSEMBLY, AND CENTERING FLANGE FOR UNLEADED FUEL ADOPTION CHANGED |
DAT 15/03/2001
|
|
5038
|
PLATE AND AIR DUCT REMOVED ON CROSS MEMBER UNDER THE SEAT COVERING HOLE WITH CARPET TO REDUCE COSTS |
DAT 15/05/2001
|
|
5039
|
FOR TURKISH MARKET REMOVED PLUG ON VEHICLES WITH AIR-BAG TO ADJUST PRODUCTION |
DAT 15/04/2001
|
|
5044
|
CHANGED FUEL UNION DOOR FOR SOUTH-AFRICAN AND INDIAN MARKETS FOR IMPROVEMENT |
DAT 15/05/2001
|
|
5047
|
REPLACED COURTESY LIGHT SWITCH FOR NATIONALISATION |
DAT 15/07/2001
|
|
5049
|
ADOPTION OF NEW CAP COVERING WIPER ARM NUT CUSTOMISED TO REDUCE COSTS |
DAT 15/05/2001
|
|
5050
|
MULTIPLE INSTRUMENT REPLACED FOR PRODUCT GRID UPDATE |
DAT 15/05/2001
|
|
5068
|
ADOPTION OF A NEW JACK AND TOOLS CONTAINER SUPPRESSING BELT, BAG, BRACKET AND SECURINGS FOR COSTS REDUCTION |
DAT 15/05/2001
|
|
5073
|
NEW ALTERNATOR WITH DIAM. 54 PULLEY AND NEW DRIVING BELT |
MOT 0714685
|
|
5100
|
WHEEL HUB CAP REMOVED FROM SW 1.6 TURKEY MARKET FOR E .BOM REGULARISATION ACCORDING TO PRODUCTION |
DAT 15/02/2001
|
|
5161
|
NEW 3-COMPONENT CLUTCH KIT ADOPTED FOR IMPROVEMENT PURPOSES |
DAT 15/08/2001
|
|
5179
|
NEW REVERSE GEAR TRIAD ADOPTED |
TEL 3076022
|
|
5197
|
STEERING BOX REPLACED TO REDUCE COSTS |
DAT 15/08/2001
|
|
5199
|
FOR INDIA MARKET REPLACED ABSOLUTE PRESSURE SENSOR CONNECTING PIPE FOR IMPROVEMENT |
DAT 15/09/2001
|
|
5222
|
NEW BRAKE OIL TANK SUPPORT BRACKET FOR LAYOUT ADOPTED |
DAT 15/09/2001
|
|
5239
|
ADOPTING AN UPPER HOOK FREE DISTRIBUTION BELT GUARD |
MOT 0452209
|
|
5257
|
ADOPTING NEW INSULATION IN ENGINE COMPARTMENT |
DAT 15/06/2001
|
|
5434
|
NEW WATER DELIVERY HOSE ON HEATER SIDE |
DAT 15/07/2001
|
|
5467
|
FUSE BOX CABLE SUPPORTING BRACKET REMOVED TO REDUCE COSTS |
DAT 15/08/2001
|
|
5522
|
NEW TIMING INDICATOR COVER AND NEW FASTENING SCREW |
MOT 0477564
|
|
5545
|
ADOPTION OF GEARBOX CONTROL SUPPORT MODIFIED WITH SOUNDPROOF SILENT BLOCK |
DAT 15/08/2000
|
|
5571
|
NEW SHEET FIXING BRACKET |
DAT 15/09/2001
|
|
5572
|
NEW DASHBOARD BODY AND NEW AIR DUCT BETWEEN DASHBOARD AND HEATER |
DAT 15/05/2001
|
|
5611
|
NEW DOOR PANEL-STOPPER PIN |
DAT 15/12/2000
|
|
5671
|
ADOPTION OF METAL CYLINDER HEAD/BLOCK GASKET AND BLOCK HIGHER THAN 1.2 MM |
MOT 0505169
|
|
5842
|
ADOPTION OF A THROTTLED BOBY WITH OUTPUTS AT 90° |
DAT 15/09/2001
|
|
6161
|
ISSUING NEW AIR-BAG CENTRAL UNITS |
DAT 15/04/2001
|
|
6528
|
ADAPTATION TO STANDARD 2000/53/CE |
DAT 15/07/2003
|
|
6611
|
NEW 70A ALTERNATOR |
DAT 15/04/2003
|
|
6776
|
NEW REAR SILENCER |
DAT 15/02/2003
|
|
6779
|
NEW WINDSCREEN |
DAT 15/11/2003
|
|
6788
|
ADOPTED NEW GEARCASE SUPPORT BRACKET |
DAT 15/12/2003
|
|
6892
|
NEW COMPLETE TANK UNIT AND NEW FILLERS |
DAT 15/12/2002
|
|
6896
|
NEW AIR CONDITIONER AND NEW ALUMINIUM CONSOLE PLATE |
DAT 15/12/2003
|
|
7029
|
NEW WATER DELIVERY PIPE FROM PUMP WITH FLAT ANTI-PINCHING GASKET |
DAT 15/06/2003
|
|
7037
|
NEW ENGINE FOR EXHAUST MANIFOLD AND FRONT TUBING |
DAT 15/07/2003
|
|
7145
|
NEW ENGINE, CYLINDER HEAD, OIL CUP, AND OIL PUMP BASE FOR UNIFICATION WITH ENGINE 1.4 8V |
DAT 15/09/2003
|
|
7255
|
CHOOSING SANDEN ALTERNATOR |
DAT 15/04/2002
|
|
7370
|
NEW ELECTROMAGNETIC RPM AND PMS SENSOR |
DAT 15/10/2003
|
|
7460
|
NEW RPM SENSOR |
DAT 15/10/2003
|
|
9695
|
NEW CONTROL COVER AND REVERSE TRIAD |
DAT 15/09/2002
|
|
10213
|
NEW SINGLE-PIECE EXHAUST DUCT GASKET |
DAT 15/12/2004
|
|
10562
|
NEW EXHAUST DUCT GASKET |
DAT 15/07/2005
|
|
11152
|
EXTENSION OF CYLINDER HEADS GASKET BIPOWER ENGINE ORIGIN |
DAT 15/06/2006
|
